GASMONITOR PLUS
Suited to both onshore and offshore use, Gasmonitor Plus is a highly flexible 19” rack-based control system for gas detection monitors. Trusted across the world, this microprocessor-controlled unit can monitor 16 gas detectors or 32 fire zones per rack, and can be tailored to your individual site requirements.
Dónde comprarGasmonitor Plus is a limitlessly expandable control panel, with its modular construction allowing it to grow with your site requirements. Its industry-standard analogue outputs will integrate fully with existing rack-mounted protection systems on site, with optional relay modules cutting down on configuration requirements and cabling.
With a simple front panel with push buttons for day-to-day functions, its unique bar graph display provides instant insight into gas concentrations across each channel. Combined with common alarm LEDs on the display guard, the whole rack status can be checked at a glance, giving clear visibility on changes across your site in moments.
Gasmonitor Plus can be engineered into very large systems and tailored to suit individual site requirements, with each channel inhibited separately so your plant safety is not compromised during checks. Plus, it is calibrated simply from the front panel, reducing overheads by half.
Limitlessly expandable
Modular construction
Optional relay modules
Unique bar graph display
One universal gas card
Simple to UsE
- All day-to-day functions are available from the front panel with push buttons for simple operation
- Unique bar-graph display provides instant representation of gas concentrations for each channel
- Common alarm LEDs on the display card means the whole rack status can be checked at a glance
Flexible Architecture
- System is limitlessly expandable with modular construction meaning modules can be added any time
- Modular construction means minimal wiring is required
- Industry-standard analogue outputs will integrate fully with existing rack-mounted protection systems on-site
- Optional relay modules provide added flexibility while cutting down on configuration and monitoring cabling
Easy Maintenance
- Each channel is inhibited separately, so plant safety is not compromised during channel checks
- Routine calibration from front panel makes maintenance simple, reducing service overheads by half
-
One universal gas card reduces spares holding
Size | 483 x 133 x 294 mm (19.0 x 5.25 x 11.5 ins) |
Weight | 9.5 kg (21 lbs) |
Enclosure material | Aluminium alloy |
Mounting | Rack mounted (3u format). Wall mounted and floor standing cabinets are optional, dimensions on request. |
Channels | 16 per rack |
Operating temperature | 0°C to +50°C (32°F to +122°F) |
Humidity | 0-95% non-condensing |
Inputs | Gas 2 or 3 wire 4-20mA (sink or source), or mV bridge |
Fire – smoke & heat detectors, manual call-points Maximum of 32 loopes per rack (ie 16 twin zone fire modules) | |
Outputs | Analogue 16 x 4-20mA, max. load 960 Ohms or 1-5 V, min. load 100 Ohms |
External audible/visual alarm drive Powered 24 V dc, max load up to 200mA for each alarm level. | |
Relays | Type Up to 84 DPCO contacts rated 5 A @ 250 V ac, non-inductive load |
Assignment – Common Alarm 1, Alarm 2, Alarm 3, Fault – Per channel Gas alarms 1, 2 & 3, fire & fault – Voting Up to 16, configurable – Relay modes Energised/de-energised, latched/non-latched, time-delayed, pulsed |
|
Digital communications | With PanelsPro or SetGMon only |
Event logging | Built-in datalogger – data available via communication links with PanelsPro or SetGMon only |
Panel indication | Channel number: 4 lines x 20 characters Gas reading: On main LCD plus green LED bar-graph on channel card Measurement units: % LEL, ppm, % Vol, Fire System fault – integrity watchdog: Yellow LED |
Alarm indication | As standard: 3 individual & 3 common alarms (red LED); Fault – individual & common fault (yellow LED); Inhibit – individual inhibit (yellow LED) |
Power | AC mains: 100 – 260 V ac 50/60 Hz external DC: 27.6 V Battery back-up: external |
Approvals | Low voltage directive – EN61010-1 EMC Directive – EN 50082-1 EMC Directive – EN 50081-1EN 50270, EN61000-6-4ATEX: Conforms to EN60079-25 in configuration with Zener Barrier Baseefa 05Y0090/1 |
Explorar productos relacionados
Subscribe to get the latest insights
IN your inbox
Read about Crowcon’s Privacy and Cookie policy here. If you change your mind, you can unsubscribe at any time