GAS-PRO IR

The Gas-Pro IR is ideal for the oil and gas industry. This personal multi–gas monitor solves the challenges faced by traditional pellistor catalytic sensors, detecting gases such as methane, pentane or propane using infrared (IR) technology even in low oxygen environments.

Dónde comprar

Harness the power of infrared (IR) technology for additional peace of mind across your site with the Gas-Pro IR portable detector.

The infrared measurement gives improved reliability and measures gas in two different wavelengths: one that absorbs gas and the other does not. The %LEL of gas present is determined by the difference in intensity between the beams measured by the photo-receiver.

With little chance of being poisoned, the Gas-Pro IR personal multi gas detector is inherently safer than traditional pellistor catalytic sensors, and saves the need of regular and expensive pellistor replacement when used in likely contaminated environments.

Simple to use and with easy testing and calibration, the Gas-Pro IR now completes the Gas-Pro range and gives greater flexibility for sensor selection in this 5-gas multi gas detector.

Detects up to 5 gases

Reduced risk of device poisoning

Intuitive functionality

Portable & durable

14+ hour battery life

IR Technology

Ultra-reliable IR technology can handle environments which can cause pellistor-based sensors to fail, for enhanced protection
Operates even in oxygen-free environments, without compromising sensitivity
Fail-safe, providing measures in %LEL
Certified for use in hazardous areas as defined by both ATEX/IECEx and UL

Size	43 x 130 x 84mm (1.7 x 5.1 x 3.3ins)
Weight	309g 4 gas (10.8oz)/ 340g pumped (11.9oz) 333g 5 gas (11.7oz)/ 362g pumped (12.7oz)
Alarms	Audible >95dB @ 30cm (98dB @30cm in loud mode) Visual – all angle dual red/blue LEDs Vibrating alert
Display	Top mount for ease of view with dual colour backlight (green/red)
Data logging	125 hr at 10-second intervals (45,000 logs)
Event logging	Alarm, over range, calibration, bump, on/off, TWA, 1000 events
Battery	Rechargeable Li-ion, >14 hr (13 hr pumped operation) based on CH₄, O₂, H₂S, CO Typical charge time 7.5 hr
Sampling	Internal pump as option
Operating temperature	-20°C to +55°C (-4°F to +131°F)
Storage	-20°C to +65°C (-4°F to +149°F)
Humidity	10 to 95% RH
Ingress protection	Independently tested to IP65
Approvals	IECEx: Ex db ia IIC T4 Gb Tamb -20°C to +55°C ATEX and UKCA: II 2 G Ex db ia IIC T4 Gb Tamb -20°C to +55°C UL: Class 1, Division 1, Groups A, B, C, and D UL 913, UL 60079-0 and UL 60079-11 INMETRO: Ex db ia IIC T4 Gb Tamb -20°C to +55°C Marine Equipment Directive: MED 1500009
Compliance	FCC and CE Complies with EMC Directive 2014/30/EU EN50270 and ICES-003
Interface	Data connection for gas test solutions and direct to PC
Charging	Direct connection to multiregional power supply Vehicle charger adaptor Desktop cradle USB power and communications lead
Crowcon Connect Compatible?	Yes

Gas	Range	Typical Alarms	Resolution
PID	0-1000ppm	50ppm	1ppm
Ammonia (NH₃)	0-100ppm	25ppm	1ppm
Ammonia (NH₃)	0-1000ppm	N/A	1ppm
Carbon dioxide (CO₂)	0-5% vol.	0-5% vol.	0.01% vol.
Carbon monoxide (CO)	0-2000ppm	20ppm	1ppm
Carbon monoxide (CO)	0-500ppm	20ppm	1ppm
Carbon monoxide (hydrogen filtered)	0-2000ppm	20ppm	1ppm
Chlorine (Cl₂)	0 – 5ppm	0.5ppm	0.1ppm
Dual toxic (CO-H₂S)	H₂S 0-100ppm CO 0-500ppm	5ppm 20ppm	1ppm 1ppm
Flammable	0-100% LEL	20% LEL	1% LEL
Hydrogen (H₂)	0-1000ppm	N/A	1ppm
Hydrogen sulphide (H₂S)	0-100ppm	5ppm	1ppm
Nitrogen dioxide (NO₂)	0-20ppm	1ppm	0.5ppm
Oxygen (O₂)	0-25% vol.	19.5% / 23.5% vol.	0.1% vol.
Ozone (O₃)	0-1ppm	0.1ppm	0.01ppm
Sulpher dioxide (SO₂)	0-20ppm	1ppm	0.1ppm
Chlorine dioxide (ClO₂)	0-1ppm	0.1ppm	0.1ppm
Nitric oxide (NO)	0-100ppm	25ppm	1ppm