VORTEX
Vortex is our most flexible gas controller package that can be customised to meet your site requirements, however complex, without the need for extensive cabling. Capable of monitoring up to 12 channels, continuous relays provide flexible and customisable control of your entire site.
Hvor kan man købeEven for large, complex sites with a variety of detection needs, the Vortex provides streamlined management of up to 12 devices, including 3 for fire, making it easy for you to have full visibility and control of your site.
Each channel has 1 fault level and 3 alarm levels, which can be combined in any pattern to trigger up to 32 output relays. Designed with flexibility in mind, while the Vortex will initially be configured to suit your operational needs, channels and alarms can be easily customised by you, if requirements change, making the Vortex an adaptable solution.
Vortex Rack & Panel formats comprise just the essential input, output and controller modules mounted on a DIN rail, with an optional display module available in panel-mounting and 19″ Rack formats. This configuration is ideal for incorporation into a variety of specialist enclosures, such as 19″ format or those with high ingress protection. A flameproof version is also available.
Other standard features include RS-485 Modbus communications for remote non-intrusive calibration and configuration.
Available in 4 formats
Up to 12 monitoring channels
Modbus compatibility
Modular construction
Internal battery pack*
Channels & Display
- Up to 12 devices can be monitored (inc. 3 for fire) by reviewing just one control panel, saving time and manpower
- Each channel has 1 fault level and 3 alarm levels which can be combined in any pattern to trigger up to 32 output relays
- Initially configured to suit your operational needs, channels/alarms are easily customised by you if requirements change
- LED display panel lights mean faults are easily seen and the whole system can be checked at a glance
Installation & Maintenance
- Modbus compatibility with no extensive cabling required
- Uses industry standard communication links, making it simple to integrate into existing control systems
- Any adjustments are performed electronically with minimal maintenance required and no drift from adjustable potentiometers
- Separate zones can be individually inhibited, allowing you to work on specific areas without affecting the rest of the system
- Modular construction means replacement parts (if required) can be simply plugged straight in
Compliance & Reliability
- Validated to IEC 61508 (SIL 1) for system dependability
- System monitors relay continuously, with coil faults identified immediately so you can act quickly
- Internal battery pack* means you’re protected even during power outage
-
System is operational at all times*Not available on flameproof versions
Vortex | Vortex Rack/Panel | |
Size | 470 x 306 x 170mm (18.5 x 12 x 6.5 ins) | Rack display: standard 19” 3U Panel display: 441 x 128mm (cut-out 366 x 84.5mm) Modules, PSU and batteries are supplied separately for fitting within a cabinet. |
Weight | 12Kg (27lbs) | Dependant on configuration |
Enclosure material | Back-box: Aluminium Front cover: ABS |
Not applicable |
Ingress protection | IP66 | Cabinet dependent |
Channels | Up to 12 (1 to 3 4-way input modules) | |
Operating temperature | -10°C to +40°C (14°F to +140°F) | |
Humidity | 0-95% RH non-condensing | |
Inputs | Gas 2 or 3 wire 4-20mA (sink or source), 0-5V | |
Fire – smoke & heat detectors, manual call-points Up to 3 loops, Up to 20 devices per loop | ||
Outputs | External audible/visual alarm drive Via relays, four 24Vdc 0.5A supplies provided. | |
Relays | Type Up to 24 SPCO, contacts rated 6A @ 250Vac (1 to 3 8-way relay modules) | Up to 32 SPCO with bus extension module |
Assignment – Common Mains fail, battery low and fail | ||
Assignment – Voting Alarms, faults and system events | ||
Relay modes Energised/de-energised, latched/non-latched, time-delayed, pulsed | ||
Digital communications | DCS/PLC/PC: RS-485 Modbus or Profibus Local configuration link: RS-232 (configuration software and lead supplied) |
|
Event logging | Up to 300 alarm, power, fault, system events are stored in Non-Volatile Memory | |
Panel indication | Channel number: 2-digit 7-segment Green LED Gas reading: 4-digit 7-segment Red LED Measurement units: % LEL, ppm, % Vol, Fire Power: Green LED Battery OK: Green LED Run/hold indication: Green LED Channel test mode: Flashing Amber LED System fault – integrity watchdog: Amber LED |
|
Alarm indication | Audible – internal sounder: Piezo Visual – Alarm: Level 1 & 2, Red LED; Fault – Per channel, Amber LED; Inhibit – Per zone, Amber LED |
|
Power | AC mains: 110/120V & 220/240Vac (switchable) 50-60hz 3.2A max DC: 20-30Vdc Battery back-ip: 2Ah internal |
|
Approvals | Low voltage directive: EN61010-1 EMC: Directive 2014/30/EU: EN50270, FCC: CRF47 Part 15, ICES-003 ATEX: Ex II 2G D Zone 1, Zone 2, IECEx optional |
|
Functional safety | Validated to IEC61508 (SIL1) |
accessories
Vortex Accessory Enclosure Accessory Enclosure
Accessory Enclosure for connection of mV bridge flammable gas detectors such as Xgard Type 3 and Type 4. Use where…
VortexPC comms lead E07533
RS 485 RS 232 Converter E07600
RS232 comms Lead F-M 1m E07404
Dual mA to mV converter module 00011E
Din-rail mounted module enables 1 or 2 mV bridge type detectors to be connected to Vortex. Cannot be mounted within…
RS-485 to 232 converter kit
RS-485 to 232 converter kit to enable Vortex PC to monitor a system from a cable up to 1Km in…
Profibus Module 2618/1
Enables one Vortex systems to be addressed on a Profibus DP network. Din-rail mounted module, contact Crowcon for further advice.
downloads
Explore Related products
Subscribe to get the latest insights
IN your inbox
Read about Crowcon’s Privacy and Cookie policy here. If you change your mind, you can unsubscribe at any time